Image status: Authorized project image available
Identified model
CS110 Anchoring Hydraulic Drilling Rig
Model reference: CS110
Drilling Rig configuration based on the CS110 reference. Confirm operating conditions before final selection.
Overview
CS110 Anchoring Hydraulic Drilling Rig (CS110) is an identified drilling-rig record for projects that require the drilling method and ground conditions to be defined before equipment is selected. Product selection is shaped by the planned hole diameter, target depth, formation, drilling method, access route, compressor or mud support, tooling and safe working envelope. The captured table is limited to fields associated with the catalog record and does not promise a result in any formation or project. COWIN MACHINE can review the bore objective, site mobility, air or mud supply, drill-pipe program, transport constraints and local safety requirements with the buyer. Configuration subject to application review. For the CS110 Anchoring Hydraulic Drilling Rig record, the review should document the actual application, site interfaces and operating sequence before any configuration is confirmed.
Key Benefits
- Connects the rig choice to the bore objective
- Promotes method and circulation planning before deployment
- Identifies compatible tool-string requirements early
- Clarifies site mobility and support-equipment constraints
- Keeps formation-specific performance claims out of unverified content
How It Works
A drilling rig combines a mast, feed system, rotary head, power source, controls and a drill-string handling arrangement to advance a borehole. The drilling method is selected around the formation, hole objective and circulation medium. In air drilling, compressed air helps clear cuttings; in mud drilling, fluid management becomes part of the operating system. Torque, rotary speed, feed travel and drill-pipe dimensions must be matched to the selected method and approved tooling. Mobility and site setup depend on terrain, access, support equipment and safe working conditions. For the CS110 Anchoring Hydraulic Drilling Rig record, the review should document the actual application, site interfaces and operating sequence before any configuration is confirmed. This working-principle guidance explains general selection context only. Exact capability, limits, materials, test conditions and compatibility remain subject to the approved model record and application review.
Typical Applications
- Water-well drilling where a bore objective and formation information are available
- Agricultural irrigation projects with documented access and depth requirements
- DTH drilling after compressor, hammer and bit compatibility review
- Quarry or mining support under an approved drilling plan
- Foundation or anchoring work with site-specific engineering requirements
- Geotechnical investigation subject to method and safety review
Selection Guide
- Target depth, hole diameter and expected formation
- Air, mud or other drilling method and circulation requirements
- Rotary torque, speed, feed stroke and pullback needs
- Drill-pipe diameter, length and compatible tool string
- Crawler mobility, terrain, transport and setup space
- Compressor, pump, power and support-equipment availability
Technical Specifications
| Drilling depth | 10-60m 10-60m 10-60m 25-60m 25-70m |
|---|---|
| Hole diameter | 90-150mm 90-150mm 90-150mm 90-180mm 90-230mm |
| Drilling method | Configuration subject to application review. |
| Air consumption | 6-12m³/min 6-12m³/min 6-12m³/min 9-12m³/min 9-12m³/min |
| Air pressure | Configuration subject to application review. |
| Rotary torque | 98ON-m 150ON-m 150ON-m 360ON-m 520ON-m |
| Rotary speed | 0-80rpm 0-80rpm 0-80rpm 0-80rpm 0-80rpm |
| Feed stroke | Configuration subject to application review. |
| Drill pipe diameter | Ф601000mm Ф601000mm Ф601000mm 76mm,89mm 76mm,89mm |
| Engine power | 1200mm 1200mm 1200mm 1800mm 1800mm |
| Dimensions | Configuration subject to application review. |
| Weight | Configuration subject to application review. |
Standard Configuration
- Rig structure, rotary and feed arrangement subject to the approved model record
- Controls and power package reviewed for the planned drilling method
- Drill-string and circulation interfaces confirmed before quotation
Optional Configuration
- Air, mud or water circulation support subject to the drilling plan
- Drill-pipe, hammer, bit and handling accessories matched to the tool string
- Transport and site-setup support subject to access review
Operation, Maintenance and Safety
- Follow the approved rig and engine maintenance schedule
- Inspect mast, feed, hydraulic lines, guards and fasteners before use
- Use approved lifting and drill-pipe handling procedures
- Confirm stable setup, exclusion zones and ground conditions
- Depressurize air or fluid systems before service
- Replace worn consumables using confirmed compatibility information
