Image status: Authorized project image available
Identified model
UNI-T2C Solar Surveillance Mobile Light Tower
Model reference: UNI-T2C
Mobile Light Tower configuration based on the UNI-T2C reference. Confirm operating conditions before final selection.
Overview
UNI-T2C Solar Surveillance Mobile Light Tower (UNI-T2C) is an identified mobile-lighting record for temporary, remote or project-site planning. The correct configuration begins with the night-work schedule, installation space, transport route, lighting objective, available energy source and local weather constraints. Solar, battery, hybrid and generator-supported arrangements solve different operating problems and should not be treated as interchangeable. The technical table only presents fields captured for this model record. It does not promise runtime, coverage, autonomy, wind suitability or regulatory compliance unless those details are separately approved. COWIN MACHINE can review site layout, mast use, charging conditions, trailer requirements, monitoring needs and maintenance access. Configuration subject to application review. For the UNI-T2C Solar Surveillance Mobile Light Tower record, the review should document the actual application, site interfaces and operating sequence before any configuration is confirmed.
Key Benefits
- Frames lighting selection around the work schedule and site layout
- Separates energy storage capacity from lighting-load assumptions
- Supports transport and deployment planning
- Identifies mast and stabilizer procedures before operation
- Avoids unverified runtime, coverage and weather claims
How It Works
A mobile light tower combines luminaires, a mast, controls, a support frame or trailer and an energy arrangement such as solar generation, batteries, a generator or a hybrid combination. Energy storage is measured as capacity while lighting demand is measured as power, so actual operating duration depends on the load, charging conditions, control settings and environmental conditions. Mast height, aiming and placement affect useful illumination. The tower must be stabilized, transported and operated within approved limits. For the UNI-T2C Solar Surveillance Mobile Light Tower record, the review should document the actual application, site interfaces and operating sequence before any configuration is confirmed. This working-principle guidance explains general selection context only. Exact capability, limits, materials, test conditions and compatibility remain subject to the approved model record and application review.
Typical Applications
- Construction sites with documented night-work and placement requirements
- Roadworks where temporary lighting layout is planned
- Mining or quarry support subject to site safety review
- Remote camps and infrastructure projects with energy constraints
- Emergency-response staging where logistics and operational limits are confirmed
- Security or CCTV monitoring where mounting and power interfaces are reviewed
Selection Guide
- Lighting objective, placement layout and night-time operating schedule
- Solar, diesel, hybrid or battery energy arrangement
- Mast height, lifting method and approved stabilizing procedure
- Battery capacity, chemistry and charging conditions where verified
- Trailer, hitch, transport and site-access requirements
- Weather, wind, local safety rules and maintenance access
Technical Specifications
| Light type | Configuration subject to application review. |
|---|---|
| Lighting power | Configuration subject to application review. |
| Light output | Configuration subject to application review. |
| Mast height | High-Tensile Steel, Hot Dip Galvanized, Square type,5 Sec 6.3 m, Manual Winch Lifting, 117km/h Wind Rating |
| Mast lifting method | Configuration subject to application review. |
| Solar panel capacity | 2 × 490W, Bifacial & BC |
| Battery capacity and chemistry | 230Ah 25.6VDC, 5.8kW`h,with Heater,10+ years Life |
| Generator type | Configuration subject to application review. |
| Autonomy | Configuration subject to application review. |
| Wind rating | Configuration subject to application review. |
| Trailer dimensions | US DOT, 2'' Ball Hitch, Single Axle, 4× Outrigger, Fork Pockets |
| Weight | Configuration subject to application review. |
Standard Configuration
- Lighting, mast and support arrangement subject to the approved model record
- Energy, controls and trailer configuration confirmed against the project schedule
- Stabilizer and transport arrangement reviewed before delivery
Optional Configuration
- CCTV, monitoring, charging or power-interface options subject to approved scope
- Solar, battery or generator arrangement matched to the operating profile
- Trailer and hitch configuration reviewed for destination requirements
Operation, Maintenance and Safety
- Inspect mast, winch, outriggers, trailer components and guards before use
- Stabilize the unit on suitable ground before raising the mast
- Keep electrical connections and battery areas dry and protected as required
- Follow approved battery, generator and lighting maintenance instructions
- Lower and secure the mast before transport or service
- Do not operate outside the approved weather and wind limits
